Welcome to Checkpoint levels

Cart:

0 item(s)   $0.00
You have no items in your shopping cart.

0

Accessories

6 Item(s)

Grid  List 

  1. Ultra Mag Laser Base (#0400)

    Ultra Mag Laser Base (#0400)

    Ultra Mag Laser Base (#0400)

    Add extra measuring capability to your Checkpoint Torpedo Level with the new patent-pending Ultra Mag Laser Base. Its CNC-machined body features solid construction, an enhanced ergonomic design, and a precision-cut channel and locking knob so you’re ready to work without having to worry about security or performance. Features include a threaded front aperture to work with Checkpoint lenses and other accessories so you can get the most work possible out of one product. The Ultra Mag Base also boasts a Class II laser that is three-axis aligned to be accurate up to ¼-inch at 100 feet. The finishing touch is our exclusive V-Groove System and rare-earth magnets that let you set the Ultra Mag Laser Base on almost any pipe up to 10 inches in diameter. 

    Professional Features:

    • Instantly add extra measuring capability to your Checkpoint Ultra Mini G3 Torpedo Level
    • Class IIIa diode laser 3-axis aligned, accurate to ¼-inch at 100 feet, lasts 10,000 hours
    • Machined channel and knob locks base securely to level
    • Four oversized rare-earth neodymium magnets
    • Laser uses two N-series batteries
    • Exclusive V-Groove System allows LB-15 Laser Base to straddle any pipe up to 10 inches
    • Compact 5-½ inch Billet 6061 Aluminum Alloy Body

    Product Compatibility:

    • EV300 Torpedo Level (#0315)
    • Ultra Mag G3 Torpedo Level (#0300)
    • Ultra Mini G3 Torpedo Level (#0303)

     

     

    Learn More
    $29.99
  2. Magnum Mag Base

    Checkpoint Magnum Mag Base

    Checkpoint Magnum Mag Base (#1312)
    This base incorporates the important slope function to our Laser Level Series by allowing the use of our Slope Pin Kits, so you can measure any grade, anywhere, no matter what your jobsite conditions are. Key to the Magnum Mag Base is our exclusive, patented jack screw system that makes it possible to make very fine adjustments on virtually any slope or surface. There are also five rare-earth magnets when you need a solid mount on any ferrous surface such as a pipe or beam. This unique base is CNC-machined out of solid 6061-T6 billet alloy for superior strength and quality, and  every Magnum Mag Base is hand-assembled to make sure that it’s ready to go to work when you need it!

    Product Compatibility:

    • EV 600 Laser Level
    • 880 G3 Laser level
    • 3D DMS Laser Level
    • Square Kit
    • US Slope Pin Kits

    Professional Features:

    • CNC-machined billet 6061-T6 alloy body, anodized, laser-etched graphics
    • Five rare-earth neodymium magnets
    • Patented jack screw system for fine adjustments on any grade
    • 12” US ruler etched on side for quick reference
    Learn More
    $29.99
  3. Bore Tool kit

    Checkpoint Bore Tool kit

    Checkpoint Bore Centering Tool (#1302)
    Checkpoint’s Professional Bore Centering Tool Kit is an indispensable aid in rough-ins, dealing with multiple joist or truss construction, block wall coring applications or any layout transfers dealing with centering from a successive layout. The setup is quick and simple, allowing straight transfer of centering points that are level or with a particular slope, pitch or grade consideration.

    Product Compatibility:

    • EV600 Laser Level
    • 880 G3 Laser Level
    • 3D DMS Laser Level
    • Inclo-Matic Laser Level

    Professional Features:

    • Precision CNC-machined alloy fixture with gradations and angles for almost any application
    • CNC-machined protractor plate with laser-etched degree markings
    • Stabilizers and lens adaptor for precision sightings
    • Shock-resistant professional storage case
    • Instructions included
    Learn More
    $79.99
  4. Square Kit

    Checkpoint Square Kit

    Checkpoint Square Kit (#1340)
    The Checkpoint Square Kit converts the EV600 Laser Level into a precision square to ensure precise angles have been set on plumbing, electrical and fabrication work. This will always make sure that every bend or cut has been made to spec, and you’ll never be wrong!

    Product Compatibility:
    EV600 Laser Level
    880 G3 Laser Level

    Professional Features:
    CNC-machined alloy straight edge, with both US and Metric rulers
    Machined slot for complete adjustability
    Precision injection molded level body adaptors for perfect workups
    Instructions included

    Learn More
    $15.99
  5. 880 Hard Case

    Checkpoint 880 Hard Case

    Checkpoint 880 Hard Case (#1398)

    Add a touch of class to your 880 G3 Laser Level – or give that special somebody an 880 G3 in this special hard case. Several features make it as tough as it is good looking – Steel shell, special synthetic covering creates a leather-like finish, and distinctive Checkpoint graphics provide standout looks. The inside is specially-molded and lined to provide a plush, scratch-free surface that also sets off the high-quality anodized finish of the 880. Perfect for a presentation or gift – even if it’s for yourself!

    Professional Features:
    Steel shell case with quality synthetic cover
    Precision molded and fully lined interior for maximum protection
    Distinctive Checkpoint graphics
    Perfect for special presentations

    Product Compatibility:
    880 G3 Laser Level (#327)

    Learn More
    $15.99
  6. 880 Armor Mag Case

    Checkpoint 880 Armor Mag Case

    Checkpoint 880 Armor Case (#1395)

    The 880 Armor Case is designed to fit the 880 G3 Laser Level with either the Stubby or Magnum Mag Base attached, so you have all the convenience of these tools at your side when you need them. This case has been specifically designed for the professional who needs quality, reliability and protection on the jobsite and features ballistic nylon construction, a high-density foam protection layer, and heavy-duty double stitching for extra durability where it counts.

    Professional Features:
    High-quality ballistic nylon construction
    Molded design with high-density protective foam layer
    Belt loop features Velcro closure adjusts for work belts up to 6”
    Distinctive Checkpoint graphics

    Product Compatibility:
    880 G3 Laser Level (#0327)

    Learn More
    $7.99

6 Item(s)

Grid  List